Ever wondered what would happen if you turned on the faucet and no water came out?
Threats of water shortages are around us. The future trends in the water supply aren’t looking good for us, and the water demand will be outpacing the supply soon.
But when you hear how much water we waste only because of a leaky faucet, it makes you think if we can avert these threats by fixing every single leak in the house.
Even if you don’t think in that scale, it may still surprise you that you’re wasting so much water and money due to leaks you may not even realize are present in your house.
With that said, how much water does a leaky faucet waste? Find out the answer to that and some more facts below.
Leakage in an average home can amount to 10,000 gallons of wasted water per year. Not only that, but 10% of those homes are leaking as much as 90 gallons per day.
Nationwide, around 1 trillion gallons of water go to waste. This equates to the water usage of over 11 million homes.
The household water leaks produce wastage can help the California drought by a significant amount.
To put that into perspective, NASA says that the state has a water deficit of 11 trillion gallons. 1 trillion is 9%, which can already bring water to over 11 million homes in the state.
About 1 in 12 homes – that’s 8.1% of all homes in the U.S. – experience water damage due to leaks inside their homes. How much water does a leaky faucet waste? We stated above one home can leak up to 90 gallons, therefore 8.1% of all US homes can lead to 11.4 billion gallons of water lost per day!
Undetected leaks cause the most damage to a home. It can cause rots in the structure of the house, compromising its integrity. It doesn’t only lead to deformed structure, but dangerous situations, as well.
It also promotes mold and fungal growth, causing various health issues for the inhabitants.
All these damages can add up in a blink of an eye. After a year, you’ll be looking at over $6 billion worth of property damage in the whole U.S.
The bad news is that it’s not typical for insurance policies to cover water damage from leaks that have gone on for a long time. Homeowners often have to pay for the repair of pipes and the resulting damage fixed out of their own pockets.
This is disappointing since it’s inexpensive to fix a single leak.
A single leak can waste gallons of water every year, costing homeowners thousands in water waste and property damage.
Why wait until it has wreaked enough havoc, though, when you can have it fixed for only $150 to $350 on average?
A leaking faucet wasting a drop a second can already give you 180 more showers per year. In gallons, that’s over 3,000 gallons of water.
Did you know that if only homeowners fixed the water leaks in their home, they can save up to 10% in their water bills? That’s according to the source that said a household’s leak can go up to 10,000 gallons.
That doesn’t include all the cash you’ll save because you won’t have to spend on expensive repairs and damages.
A family of four shouldn’t be using more than 12,000 gallons per month in the winter.
If they exceed that point, this can be indicative of a water leak. It may even be a sign that you’re dealing with serious water leaks.
Observe your water consumption and bills to see if they’re rising. Even if you’re unsure, a visit from a plumber will help you detect any water leak.
Another risk you should watch out for during the colder months are freezing pipes. Frozen pipes are prone to bursting, which will drench your home in cold water.
If the pipes ended up surviving the frost, they’ll have to then pass through the rising temperatures. As the temperature becomes hotter, the frozen pipes will begin to thaw.
This is when you’ll see leaks, and if you’re unlucky, it could still cause pipes to burst.
Toilet bowls always have water sitting in it, which means it can be hard to detect a water leak. This leads to gallons of water wasted per year. You can do a little experiment, though.
Add a few drops of food coloring into the tank, close it, then wait. If the water in the toilet bowl starts to stain, it means it’s leaking. Flush it right after your experiment as it might stain the insides of your toilet.
Your floor is feeling a little warmer than normal? That might signal more than a hotter day – it can be a sign that a hot water pipe is leaking underneath.
If you can feel it, it might also mean the problem is bigger than a few drops leaking. Investigate or call a professional to help you deal with it ASAP.
A professional plumber is who you need for detecting leaks behind walls, in your ceilings, and other parts of the house. They know how to determine if there’s a leak and where the leak is coming from.
They also have gadgets and tools to find the leak and then fix them without delay. An example of which is an amplifier that helps them locate where the leak is using their sense of hearing.
After knowing how much water does a leaky faucet waste, you should now take measures to prevent leaks and to detect them as soon as possible. Always leave it to a professional so you don’t waste any more time.
Even if you only suspect a leak, it’s better to be safe than sorry. Contact us for any plumbing-related needs, including detecting leaks and fixing your pipes.
An average of 250,000 homes suffer water leakage damage resulting from burst pipes every year.
In the event of a water leakage problem, you might need the services of a plumbing professional. Many people just hire the first person who says that they can fix the problem.
Unfortunately, hiring an individual whose skills you aren’t sure of is a gamble; they might not only fail to identify and fix the leak but might also exacerbate the problem.
This is why it is recommended that you take your time to research before engaging any plumbing service.
Do you suspect there are water leaks in your home? If you’re in Diamond Bar, CA, you need to hire a plumber. Here’s how to hire the best leak detection plumber.
Unfortunately, when it comes to seeking professional services, most homeowners tend to rely more on word of mouth rather than accreditations.
If you do get a word-of-mouth referral, ensure that that service has a state-specific business license to operate.
Additionally, they should have individual certifications for each professional on their staff. Credentials are not only essential to ensuring you get stellar services but to also be sure that they are legally allowed to be providing those services.
A reputable plumbing company will always have insurance. Due to the risky nature of their work, professionals ensure that they invest in insurance so as to cover any potential losses or damage while on duty.
It certainly helps to know that someone has your back in case something goes wrong.
A reliable company will prove its worth from the beginning to the end. From the moment they pick your call to the time you complete their forms to finish business with them, they should be courteous and responsive.
Additionally, they should keep you updated about the specifics of their approach to the problem in simple language.
In the past, one of the best ways of obtaining professional services was through word-of-mouth. Today, however, you are better-off by checking online reviews. This is because they allow you to know the opinion of more than one person.
You will know that the plumber you are interested in is trustworthy if they gave credible reviews that reflect the quality of their services. Most of the time, you are likely to find these reviews on their website.
Keep in mind, however, that they will probably only display excellent reviews. After all, it would be bad business to do otherwise. This is why you should look for reviews on public domains such as their Facebook page or Yelp.
Nevertheless, it is important to be realistic and expect some bad reviews. You are never going to find a company that has a 100 percent satisfaction rate.
Ensure that the leak detection company you are looking into has a lot more positive reviews than negative ones.
The worthiness of a good plumbing company is often measured by its reliability. After all, if water is already leaking in your home, you want the problem fixed as soon as possible.
A good plumbing company, therefore, is one that provides emergency services.
When evaluating a company, ask them how soon they can get to you as soon as you have called.
Another indication of a good plumbing company is their willingness to help out their customers. Their website is a good place to check that out.
For instance, their website should let you know the kind of services they offer.
This makes it a lot easier for you to know whether they can fix the problem that you have. This is often a sign that they are happy and willing to help their customers.
An excellent plumbing contractor should be able to provide you with an accurate or close approximate quote of the job after inspecting your home.
And because hidden issues may arise any time, they should be transparent about everything and take the time to explain any extra charges.
While you might think that you are saving money by not engaging a professional, you stand to lose a lot if the level of damage is way beyond the skill level of the individual you have hired.
Professional plumbers are well prepared to deal with any kinds of leakage and plumbing issues inside your home. Here are some benefits of contracting a professional.
Even though a leak might look like a basic plumbing issue, it could be the symptom of a bigger underlying problem. A professional plumber not only knows how to fix the problem but also identify its cause so that the issue does not recur.
For someone to become a plumbing professional, they have to go through thorough training so as to receive their certification.
This training ensures that they are proficient and thorough in their work. Additionally, they are able to do a detailed diagnosis of your issue to understand the problem and provide a viable solution.
A professional plumber will give you a full guarantee of the work they have done since they believe in their competency. As such, if you have any complaint or grievance in the future, they will come and repair the problem.
If you suspect that you have a leak problem in your home, it is important that you get it looked at as soon as possible. Failure to do so can result in water damage that is typically quite costly to repair.
A leak detection expert will inspect your home so they can identify and fix any problem spots in your plumbing that could be causing the leak.
Are you looking to hire a plumber?
KP Plumbing has been providing Diamond Bar, CA residents with stellar plumbing services for over 10 years. Our aim is to ensure that once the problem is fixed, you never have to call us again.
Contact us today to learn more about our leak detection services.
Installing new plumbing in a home can cost as much as $15,000.
This is a tidy amount of money. The good news is that these are charges for a complete overhaul of the system.
Repair and spot replacement costs are significantly lower than this. However, you have to catch them on time before they become serious problems.
Here are the main causes of pipe leakage and what to do to prevent it from blowing up into a major plumbing issue.
The pipes’ joints or the bends are the more vulnerable parts of your pipes. These are put in place to ensure that water is redistributed to different parts of your house.
The joints are usually manufactured separately, then attached to straight pipes on each side.
Unfortunately, high water pressure and extreme temperatures can overtax these sections of your pipes.
If you hear banging or clanking, especially when running hot water, you might have joint damage.
To be on the safer side, call in a plumber for leak detection immediately.
Despite your maintenance and care regimen, your pipes will undergo wear and tear over time.
If your pipes are over 30 years old, this problem is more likely to occur. The materials used for piping in that era were not as resistant as the materials used today.
Corrosion can eat away at the pipes in your home and create open spaces for water to seep through.
Your piping can also get corroded if your water has a low pH.
Such corrosions can create holes significant enough for you to encounter pipe leaks.
Aside from the metallic piping, your piping system also has seals. These are located where your pipes connect to a specific fixture.
These are used to keep the connections water tight.
Just as it happens with the piping itself, these seals can degrade over time as well. When seals break apart or crack, it becomes an avenue for water to seep through.
Old and overly dried up seals are the most likely ones to degrade in this manner.
With time, the pipes in your home might shift. This can be brought about by flooding, erosion, foundation problems, tremors, or earthquakes.
Some symptoms of this include low water pressure, discolored water, and running water noises behind walls.
If you notice these or any other unusual occurrences after a natural disaster, get your plumber in for an inspection.
A significant number of occurrences that lead to plumbing emergencies have something to do with how the pipes were laid to begin with.
Typically, there could be small errors or oversights that might even be hardly noticeable. With time, however, they can cause massive water damage.
A plumbing system forces water to flow against gravity in numerous places.
For this reason, it’s important that connectors and pipes are laid correctly, and firmly. Backflow devices should be installed as well.
It therefore imperative to have all your plumbing work done by a reputable plumbing company.
If you move into a house with any plumbing issues, ensure that the team you get to evaluate the problem is well qualified as well.
This will give you the assurance that the problems will be identified and sorted out sufficiently.
On the face of it, drain logs seem like a minor issue. However, ignoring them can severely compromise your plumbing system.
If a clog has corrosives like household chemicals, these could eat into the piping and create holes. This is one reason why using chemical drain cleaners is discouraged.
The main assumption when using these cleaners is that they will run through the pipes and clear them along their lengths. This does not always happen.
Instead, they might get trapped along the system. Standing in one spot in this manner, over time is enough to create serious damage.
If you feel your pipes need a thorough cleaning, call in a plumber to do a plumbing snake or hydro jetting, and remove any obstructions.
While everyone loves high water pressure, excessively high pressured water can be disastrous to your pipes.
In extreme cases, water pipes can burst.
However, the more common occurrence is leaking water immediately after you turn off the water.
If you notice this severally throughout your house, have a plumber and come in and reset the water pressure to something more manageable.
Most people ignore the little signs of plumbing problems either hoping that they will resolve themselves, or to avoid the associated costs.
It is ill-advised to go about it this way.
These issues are more likely to get worse than go away. And not just that, pipe leakage can seriously damage your home.
Moisture encourages the growth of invasive black mold. This is not only difficult to eliminate, but also costly and can affect your family’s health as well.
Another problem is that water leaks may warp your home’s walls. This reduces its aesthetic value and will reduce the home’s value if you ever decide to sell it.
Your pipe’s bursting is just about the worst outcome you could get from a defective plumbing system.
If this occurs, you could be dealing with floods. The property damage, as well as the plumbing system overhaul that might be necessary, are enough to dent one’s finances significantly.
One way to avoid huge bills and inconveniences is by assessing your plumbing system every so often as well as being keen on the symptoms outlined above.
Having regular inspections done on your property can also alert you to issues before they get out of hand.
KP Plumbing uses the latest technologies to ensure your piping system performs optimally and that any pipe leakage is arrested before causing any significant damage to your home.
Are you a homeowner in Rowland Heights? Check out our testimonials so that you can have the confidence of calling us today for a plumbing inspection.
In 2016 alone, Americans spent over $ 250 million on drain cleaner agents.
Clogged drains are the most common plumbing issue. Whether it’s a blockage on your main pipe or at the kitchen sink, chances are, you have encountered a clogged drain at some point.
When facing a clog, you will notice changes in how water drains which may be combined with foul smells. If the problem is left unattended, major damage might result which might be expensive to fix.
In this article, we will look at some easy plumbing maintenance techniques to prevent your drain from clogging.
Any solid particles that get into your pipes can cause trouble later on even if they appear to be tiny and harmless.
As they build up, the flow of water within the pipes will slow down making it easier for more particles to get caught at the clogged section.
When dirty dishes are piled on the sink for cleaning, ensure that you collect all food remnants. Have a container in place to store such waste. You should do this even if you have a food disposer.
In addition, make sure that all the grease is wiped from the utensils before washing. Grease is actually one of the leading causes of clogged sinks. When it is warm, it will flow well into the pipes.
However, as it starts to cool, it will begin solidifying and form a clog. It will then start blocking the flow of water and trap other materials.
Have a jar in place to collect the grease before throwing it into the trash.
There are many chemicals available in the market that can unclog drains. However, they also come with their own problems.
Top on the list is that they corrode pipes. The more you use them, the greater the corrosion which in turn reduces the lifespan of your pipes.
When clogs occur, the causing agent most of the time is organic matter. Fortunately, there are noncorrosive bacterial drain cleaners that will not damage your pipes. You can get it in liquid or in granular form.
All you have to do is flush it through the drain and it will consume the organic matter.
These bacterial drain cleaners will also not affect the bacteria in your septic tank. To ensure they work well, use the bacterial cleaners when the drains will not be in use.
Little pieces of fabric, facial tissue, lint, and sometimes a sock can get through your washing machines drain hose and cause a blockage.
To prevent such clogs, put lint trap at the end of the drain hose. Such mesh lint traps are available at hardware stores and home centers. Try holding it in place using a zip tie.
You should check your trap regularly and replace it when it is full. Alternatively, you can also use an old nylon stocking.
It is often the things you suspect least that will cause your drain to clog. Little bits of hair and even foam from soap can instigate a clog.
Rather than finding ways to unclog the drain, you are better of preventing such elements from getting into your drains in the first place.
You can do this using a mesh screen that is placed above your sink stopper or replace your stopper altogether with one that has an inbuilt screen.
With the latter, water flow may be obscured as particles caught increase. Therefore, you will have to remove it regularly so that you can clear it.
Do not let the thunderous flow of your toilet fool you into thinking it is invincible. At times people flush down personal effects. They may make it past the toilet drain, but they probably won’t make it to the sewer.
As more and more of these materials get caught up within the pipes, they may cause major plumbing problems.
Since these materials do not decompose quickly, they also add an extra burden to water treatment facilities.
To protect the environment and yourself from serious clogs, avoid using the toilet as a waste disposal pit.
If your toilet shows signs of clogging, call up a professional plumbing service immediately.
Even if you wipe and collect the grease off your utensils, it may not be possible to get it all out. The buildup of such oils under the sink will slow down water drainage and lead to clogs.
Once you are done doing the dishes, pour hot water down the drain. This will keep the greases and oils in food products flowing further into the drain.
Do this if you need to get rid of foul odors from your sink. Baking soda is also quite effective in clearing clogs. However, for the best results, wash it down with hot water.
Vinegar is an excellent cleaning agent. The acetic acid content in it makes it a great organic solvent.
Once you have poured it down the drain, wait for half an hour then wash it down with very hot water. This method will remove all the buildup of organic matter in your pipes.
If you have been having regular clogs, try using a mixture of baking soda, salt, and vinegar. Use this method overnight in order to get the best results. Chase the mixture down with hot water early in the morning.
The key to preventing your main drain from blocking is proper maintenance of the interior network. Avoid letting any inappropriate substances down the drain and clear minor clogs regularly.
However, if you have had consistent clogs, it may be time for professional plumbing maintenance.
KP Plumbing is a leading plumber in Walnut, CA. We have a team of competent staff and utilize the latest leak detecting technology to nip problems in the bud. Check out our services to see how we can be of help to you.
Water damage is, of course, no laughing matter.
Just check out these statistics:
Clearly, water-related issues in the house have major repercussions.
One common source of water damage is getting a leak somewhere in the wall. This can create serious problems if left untreated for long enough. For instance, even small leaks can lead to flooding, electrical issues, mold, and structural damage.
It’s in your absolute interest to get a leak sorted as quickly as possible! But how do you do it?
Keep reading to learn exactly what to do if there’s a water leak in the wall in Diamond Bar, CA.
The first step to stopping a leak is knowing it’s there in the first place.
Major leaks will become obvious quite quickly. But smaller ones can go undetected for considerable lengths of time. The damage can be done before you realize it’s even there.
Here are some leak identification tips to find the leak before it becomes a serious problem.
One clear sign of a leak is the sudden appearance of dampness.
You might smell the damp before you see it. There may be a mustiness to the air that can indicate water in the building materials. Likewise, depending on the colors of your walls, you may need to touch the area to discover the wetness there.
Whether you spot damp on the floor, wall or ceiling, you need to act immediately. Don’t wait and hope it gets better! There’s almost certainly a water problem that needs fixing.
Likewise, standing puddles are further evidence of a leak to address.
You know your house better than anyone.
Keep an eye out for any discoloration of the surface areas in your home. Pay particular attention to areas you know there’s piping around. Think kitchen and bathroom sinks, showers and bathtubs.
Discolored areas are often another clear indicator of a leak. That’s especially true if you notice the area getting larger over time. Any evidence of staining should be taken seriously.
Do you have wallpaper decorating your walls?
It’s normal for it to start peeling over time. However, be wary if it starts happening unexpectedly. Any moisture that gets trapped in the wall will make the paper begin to peel. If the wallpaper seams start separating, or paint starts flaking, then you may have a water problem.
Your walls, floors, and ceilings were all made straight.
That’s to say, it’s unlikely that any warps, bends, and buckles would be evident after construction. As a result, it’s a bad sign if they start to appear!
Indeed, leaks have a habit of warping walls and buckling floors and ceilings. Water collects in a certain place, materials absorb it, and the forces of nature alter them accordingly.
Spot anything like this start to happen? Take immediate steps to resolve the problem. You’ve probably got a leak.
A final sign of a leak is fairly clear cut:
You hear sounds of running or dripping water where there once was none. Be sure to keep an ear out. If there are no faucets turned on anywhere, but the noises persist, then you probably have yourself a problem!
The sounds may be more subtle though. Think hisses and high pitched noises. These can also indicate slight cracks in pipes that are releasing water.
Now you know how to identify a leak, let’s turn to how to stop it. Here are some essential steps to take if you find a leak in your home in Diamond Bar, CA.
Let’s imagine you now know there’s a leak.
The next step is to identify its exact location. This is often easier said than done! However, a moisture detector can make your life easier. You place this device against the area to detect the level of moisture there.
With multiple readings, you can pinpoint the area with the highest water content. Oftentimes the leak itself will be just above this area as the water drips/flows downwards.
The next step can feel somewhat drastic if you’ve never done this before.
But to fix a leak you need to get access to the pipe itself. With the location identified, use a drywall saw to create a hole. Keep it small to begin and use a torch to look inside. Check for moisture on the pipe.
You may need to repeat this process multiple times to find the exact source of the leak. Once you have, make the hole larger to provide easier pipe access.
The next step is to stop the leak itself by fixing the pipe.
Start by turning off the water to the house. Next, the right approach will depend on the type of pipe.
You might have a plastic, copper or iron pipe behind the wall. The basic process involves cutting out the damaged part of the pipe and replacing it with a new bit of the same material (using glue, pressure fittings or clamps). But the exact process varies.
However, to do the job correctly we’d always recommend to…
The best way to effectively solve a leak is to hire a professional plumber.
They have the right tools and know-how for the job.
Likewise, they can help you identify the leak in the first place. It’s often hard to be sure when there’s a problem. Speak with a trained plumber will guarantee peace of mind. They’ll come and inspect your home to see if there’s a problem. If there is, then they can take steps to stop it then and there.
There you have it: exactly what to do if there’s a water leak in the wall of your Diamond Bar, CA house.
Water damage can have severe negative effects on any house. It’s in every homeowner’s interest to find and stop any leak before it causes major problems. Water leaks in the wall are all too common.
Hopefully, the post has highlighted the key steps in identifying and resolving the issue.
Remember, calling an expert plumber is always your best option. Looking for help detecting a wall leak and/or stopping one ASAP? Check out our services now and give us a call for swift, professional support.
Even a small water leak can cause big problems for your home. If you suspect a leak, your best bet is to hire a professional who uses reliable water leak detection equipment to quickly and accurately scope out the problem area.
Water leak detection equipment uses state-of-the-art technology to find the location of leaks. This eliminates guesswork and lets your plumber address the issue directly.
To learn more about signs of leakage, leak detection services, and the specialized equipment used, read on.
Many leaks aren’t immediately obvious. While leaks can go undetected for quite a while, there are some indicators that you may have one. These should be addressed as soon as possible so that extensive damage doesn’t occur.
Water leak repairs should be done right away as water damage worsens over time. Early leak detection reduces damage potential.
Do a thorough visual inspection of your surroundings. Some leaks will cause stains to form on floors, walls, ceilings, and cabinetry.
Another visual indication of a leak can be wet areas around your property that never seem to dry. These can be indoor or outdoor.
Warped woodwork or unusual or persistent wet areas on the carpet inside or consistently wet areas outside can indicate trouble. Puddles and water flow are especially concerning.
Some leaks may be substantial enough to cause a drop in water pressure. If you notice less water force when you turn on your faucets or spigots, a water leak may be the culprit.
Your water meter is a great tool if you suspect a water leak. It’s easy to check your meter to see if the water is flowing when it shouldn’t be.
To see if you have a sizable leak, write down the reading on your meter. Do not run your water for a stretch of 2 – 3 hours. If your meter shows use after a few hours, you may have a leak.
Sometimes an increased water bill is the first indicator that you have a water leak in or around your property. Your water bill may be much higher than usual when you have water leakage.
If your regular water usage has remained the same but your bill has increased, it’s probably time to have your property checked for leaks. Professional plumbers use specialized equipment and years of experience to provide a thorough check.
Sometimes a home or business owner’s inspection isn’t enough when it comes to hidden or underground leaks. In addition to a visual inspection, professional plumbers use special water leak detection equipment to find leaks so the correct water leak repairs can be made in a timely manner.
Leak detection equipment uses sound and temperature reading technology to find water leaks that might otherwise be difficult or impossible to find. This equipment gets to the source of the problem right away so the proper repairs can be done. It also reduces the destruction that can come with trying to manually find leaks.
Leaks can cause unsightly and structural damage when left unaddressed. This is especially the case with slab leaks. Over time, these leaks can cause cracking and shifting of your foundation as the pressure of the water builds. It’s essential to hire a professional who specializes in leak detection to find and fix these leaks before costly damage is done.
Leak detectors such as the Goldak leak detector use low noise detection to seek out leaks, especially those in commercial and residential slabs. Extremely sensitive microphones in these detectors pick up on a wide range of leak sounds. These sounds are then amplified and played through stereo headphones that reduce external noise.
This equipment allows for the adjustment of microphone sensitivity, sound amplification, and filter frequency. This makes it easier for the operator to interpret the water leak sounds and take the appropriate action.
These detectors require special training in order to be used correctly. Professionals using the equipment must be able to identify a range of sounds to determine what kind of leak they are working with and how to go about repairing it.
Thermal imaging cameras such as FLIR Thermal Imaging Cameras are excellent for detecting leaks in ceilings, walls, and slabs. Like leak detectors, this technology reduces or eliminates the destruction to structures that was previously required for finding leaks.
Thermal imaging cameras use infrared technology to indicate areas where a leak is present. They don’t actually “see” the leak. Instead, the cameras visualize the temperature differences of surfaces due to the presence of water. They do this by detecting infrared radiation levels that are emitted from a surface.
A difference in radiation levels due to temperature variations can indicate what’s happening within a structure. Areas of leakage will evaporate water so those areas will vary in temperature from the surrounding dry areas. The contrast of areas is used to decide the problem’s location and severity.
Knowing a leak location is especially helpful with slabs. Thermal imaging can pinpoint not only the area of the leak but also the depth at which it is occurring.
Infrared technology used by thermal imaging can save the professionals time and help them work more efficiently. This process also saves the customer money, as the process is quicker and less damaging than the old detection methods.
If you’re in the Diamond Bar, Rowland Heights, or Walnut areas and think you might have a leak, we can help. Because our equipment uses new and accurate technology, leak detection can be conducted without destruction.
We offer a variety of plumbing services and specialize in leak detection. If we don’t find a leak, there’s no charge to you.
Water leaks can be frustrating and destructive. Finding them quickly with water leak detection equipment saves time and money because it gets to the source of the problem immediately.
If you think you’ve got a leak, let us help you. We serve the Rowland Heights, Diamond Bar, and Walnut areas and specialize in high-tech leak detection. Contact us at 909-341-7249 today for more information!
Did you know that the average Joe or Jane spends at least eight minutes in the shower?
Doesn’t seem like a long time, right?
No, but consider this. A standard showerhead lets out about 2.5 gallons of water per minute. That means for every eight-minute shower you take, you’ve already used 20 gallons of water.
That said, it’s no wonder the average water use in California was 86 gallons per day, per person in 2016. If you have plumbing leaks, however, there’s no doubt you go beyond that amount.
That’s why leak detection services should be a priority if you think you have dripping pipes. Leaks aren’t only expensive; they’re also a complete waste of resources.
Before you call the first plumber Google gives you the number of, it’s best to do some preparation first. Check out the tips we’ve listed below so you can get the best bang for your buck when hiring a plumber!
Before calling in the plumbing pros, confirm you actually have leaks first. It can take some time, but it’ll be worth it since you’ll also know how many leaks you may have.
This will then give your local plumber an idea of how big the leak repair project will be. For you, this means having an estimate of how much the job may cost.
In this case, your water meter can serve as one of your best leak finders. Most home water meters are inside, often in the basement or garage.
To start checking for leaks, make sure no one is using water in any part of the house. Then, check the meter and see if the orange or red dial is moving. Some meters may also have a tiny, rotating silver wheel that indicates flowing water.
A moving dial or wheel means there’s still water running inside the house. It could be very helpful if someone else can do the checking of the faucets and toilets while you look at the meter. If not, you need to check them to determine which one is causing the leak.
You can also turn off each faucet and toilet at a time to see at which point the meter stops. Doing this lets you pinpoint the leak source. Also, since you’ll check for each potential cause, you’ll know how many faulty faucets or toilets you have.
In case you have an older meter, you can still check for leaks by comparing readings.
To do this, look at your meter and take note of the current reading before heading to work. Make sure no one will use water throughout the house and for the rest of the day. Once you get back home in the afternoon, check the reading again.
If there’s no change, you don’t have a leak. If the readings don’t match, then it’s time to call in a leak detection specialist.
After confirming you do have plumbing leaks, set up a schedule with a plumber right away. You want to go local, whether you live in Diamond Bar or Rowland Heights, California. This way, you can rely on the water leak specialist to get to your home as soon as possible.
Before setting up an appointment though, make sure you do the following first:
In California, plumbing contractors who take on jobs worth $500 or more need a license. It’s the law, and failure to abide by this can result in the suspension of the project.
Plus, having a license means the contractor has at least four years of experience. This also means they have liability and worker’s compensation insurance. Furthermore, licensure means they have filed at least a $15,000 bond with the Registrar.
These will protect you from liabilities and your property from damage in case of an accident. Let’s say the plumber slips due to the wet floor while fixing leaks in your home. If the plumber sustains injuries, you won’t be liable for the incident or the hospital bills.
Plus, a license also makes it easier to verify the plumbing business’ legitimacy. You can contact the California Contractors State License Board to confirm this. The CSLB will let you know that the contractor has an up-to-date license.
Look up online plumber reviews and testimonials from previous clients. If possible, look for customer reviews specifically on water leak detection services.
These reviews may contain info on how long it took the plumber to pinpoint leaks. You may even find out which plumbers use precision plumbers leak detector technology. Precision leak detection technology saves time by pinpointing exact leak sources.
Make the leak detection and repair visit as problem-free as possible with these tips:
The national average cost to hire a plumber is about $300. Most plumbers charge per hour though, depending on the project.
As such, you want to make the job take up the least time possible to keep your costs down. That’s why it’s best to clean and clear the repair area (where the leaks are) before the plumber arrives. This lets the leak detection and repair specialist get started right away.
If you have pets, place them in another room so that they won’t disturb the plumber. Allowing them access to the job site can lead to your furry pals sneaking out some of the plumber’s tools.
Also, keep in mind that plumbing parts and tools can be small. Your pets may chew and swallow these, which can cause health risks. Some can even get stuck in their throats and pose choking hazards.
Keep in mind that a single faucet that leaks 10 drops of water per minute can already waste three liters of water a day. That’s why you want to find a trustworthy provider of leak detection services ASAP.
So long as you follow our tips though, you’ll be able to save water and money by getting those leaks fixed soon.
Need immediate water leak detection and repairs? If so, then don’t hesitate to schedule plumbing service and repair with us! Ring us up now to set up an appointment or if you have any plumbing-related questions.
Do you live in an old house? Do you see molds and mildew forming inside the bathroom? Are there bubbles forming in your wallpaper?
These are signs that your house is suffering from a water leak. If you fail to arrest water leaks, it may lead to more serious and expensive repercussions.
Not only do your water bills go up, but you may also potentially spend thousands of dollars on repairs. Water leaks can cause costly damages on floors, walls, and your home’s foundations.
To arrest the problem, you need the help of a professional water leak detector.
Continue reading below as we discuss the major reasons to call a specialist.
Though you can fix a leaking pipe in your kitchen sink, you cannot say the same for those that are inside your walls, floors, and ceiling. In such instances, you may need to tear down some parts of your old house. This is one tall order that requires the help of a professional.
A leak detector specialist can take on the job. He has the right knowledge and proper tools to find the leak and address the matter, swiftly. Here are the benefits of hiring a professional inspector:
If you have an old home, there is a big chance of water leaks occurring. When leaks happen, your water meter continues to run even if you close all of your faucets. Even a tiny leak can increase your water bills.
A professional leak detector can pinpoint the leaks. Regardless if the leaks emanate from behind the walls or under your floors, the detector can take them apart to accurately locate the root of the problem.
Once they seal the leaks, expect your water bills to normalize.
When severe leaks occur, they can spread onto your floor. Sometimes, they even reach areas where some of your appliances and precious items are.
Leak detectors can remedy the problem and keep the water from reaching your appliances and furniture.
The foundation of your home is practically the most important. Not only does it keep your home standing, but it also ensures the safety of the entire structure. But water damage from leaks can compromise your home’s foundation.
Repairing your home’s foundation is one of the most expensive home improvement expenses you can experience. Expect to spend around $4,000 to $10,000 in case the foundation collapses. Sometimes, an expensive foundation repair can reach over $100,000.
If there is a leak on your water supply pipes, it will likely jack up your water bills. But more importantly, the leaks can compromise the safety of your home’s water supply.
Leaks mean the pipes are open for different types of contaminants. Bacteria can easily slip into those pipes and blend with the water.
In worse cases, leaks on wastewater pipes may contaminate your entire property. But with the help of water leak detection companies, you can restore the safety and cleanliness of your drinking water at home.
When leaks occur, they can get worse in a matter of days. When pipes burst, it can affect water pressure. When water pressure is weak, expect to have weak water flow coming from your faucets, showerheads, and spigots.
Through professional plumbing and leak detection, you can restore the right level of water pressure that your old home needs.
Lastly, hiring a leak detector specialist will save you money in the long run. If you keep your leaking pipes as is, the issues can easily escalate. When things get out of hand, the damages will spread in other areas of your property.
When this happens, you can expect your repair expenses to soar. Spending for a professional leak detector today is cheaper compared to the thousands you may shell out once things go out of control.
Now that you know the importance of hiring a professional leak detector specialist, the next step is finding the right one. Check out these few tips that will guide you toward the right choice:
First, you need to consider the experience of the detectors. When looking at American leak detectors, find out if they have extensive training.
Research on their previous projects. Do they have happy clients? Or did they receive negative feedback for their services?
Examine the methods that they use to detect leaks. There is a number of techniques companies use that doesn’t require digging the property.
Find a company the offers some of the latest technologies in leak detection. Go for a detector that uses thermal imaging and electronic leak detection.
You also need to look at the track record of the company. How do they fare in the local plumbing community? Do they have a reputation for providing fair and honest quotes?
How about the quality of their output? Do they treat their clients fairly? Did they treat you with respect and professionalism in regards to your inquiries?
Water leaks can sometimes involve other plumbing concerns. To save time, you need to find a leak detector that uses a comprehensive approach.
Find someone that offers more than leak detection. This will help save you both your time and resources.
Lastly, you need to hire a licensed company. Go for leak detectors that are both bonded and insured. This will help protect both parties when things go wrong.
Some companies do not have insurances. This means when their staff gets into an accident, you may end up paying for their medical expenses.
Moreover, companies that don’t have a license tend to offer shoddy output.
Water leaks in your plumbing system are an urgent matter. So if you’re searching for a leak detector specialist you can trust, look no further.
Give us a call or send us an email and let us know what you need. Request for a free estimate and our friendly staff will discuss your options.
Let’s start fixing those leaks, today!
Did you know that the average plumbing cost is about $4.50 per square foot of your home’s size?
This is the expense you’ll expect if you’re trying to do a new installation. The main reason is the fact that plumbers will ensure that the work passes inspections related to several plumbing codes.
You can avoid these high costs with a water leak detection service. That helps ensure that you’ll fix the problem before it becomes unmanageable. After all, slab leaks will exert pressure under the home, damaging your furniture and wooden surfaces.
Are you ready to learn the other reasons to get leak detection? Read on and find out more today.
It’s an accepted fact that even the water we use isn’t free anymore. In the United States, the average water price is around $1.50 for 1,000 gallons. What this means is that a gallon of water will cost less than a penny.
Regardless, as time goes by, water will become scarcer and harder to get. That means the price of water in the future will go up in a consistent fashion. That’s why it’s necessary to ensure that the water you pay for isn’t getting wasted due to leaks.
If you hire a professional, you’ll have the means of detecting a water leak. You can rest easy, knowing that all the money you spend will have some use in your household. It’s especially important if you’re thinking about the long-term cost reductions.
Having your own water supply isn’t going to be enough for your household. It’s always more necessary to ascertain whether your water supply is safe. After all, you don’t want your family members to suffer from water-borne diseases due to your lack of vigilance.
If your pipes’ leak isn’t detected, you’re risking your family to contaminants. They might get infections from drinking or using the water in any other way. It’s also worth noting that your entire property might get contaminated if your wastewater pipes have leaks.
To get a sense of peace, you need to get the leak detection services of professionals. They have the expertise and technology needed to find leaks wherever they might be.
Are you concerned about the environmental effects of your household? If so, you might want to ensure that all your pipes aren’t leaking. In the United States, the booming population puts a lot of pressure in the country’s fresh water supplies.
With that, the demand for clean water increases. It results in droughts across the country, with snowpacks getting reductions on an annual basis. You also need to remember that a lot of states’ reservoirs are at their lowest levels compared to prior years.
Detecting leaks earlier on will ensure that you conserve your water supply. It might have a little impact on the environment since you’re a single household. But if everyone in the neighborhood fixes their leaks, the environmental benefits will increase a lot.
Another problem that might arise from neglecting water leaks is the exponential increase in costs when the problem gets bigger. The small, negligible damage can grow into a major problem if you don’t detect it early on. Some households end up replacing their entire plumbing system since they didn’t pay attention to small leaks over the years.
If you detect water leaks within its beginning stages, you can get the most out of your current water supply system. That means you won’t have to install new expansions and additions to that system unless you need them. That can save you a lot of money—from installation costs to maintenance expenses.
The worst part about water leaks is that they aren’t limited to just wasting water. Over a long duration, a ground leak can end up causing damage to your home’s foundation. This will increase the moisture levels within your house, giving rise to other problems.
One of the most common results of unfixed leaks is the growth of mold and other fungal infestations. All of these are problems that carry a hefty price tag when you try to solve them.
If your household’s pipes break from water mains, it will do a lot of damage to the surrounding buildings. It’s inconvenient, especially when your leaky water system ends up damaging your entire neighborhood. It will place you at a considerable financial liability, which can ruin your future.
That’s why it’s important to let professionals handle the problem as soon as possible. It decreases the possibility of disasters from happening.
Carrying out leak detection is to ensure that you get a consistent water supply. You don’t only need to make sure that you have enough drinking water to go around. It’s also important to maintain it in a way that your house stays safe and functional.
For example, if the water leaks and it makes your supply intermittent, you might not have the means of responding to emergencies. What if your house catches a small fire? If your water isn’t consistent, your water sprinklers might not work at all.
There are a lot of other benefits when you opt to get your house checked for leaks. It helps you feel more secure while minimizing the money you need to spend to fix bigger preventable issues you’d otherwise get. If you’re looking for more basic reasons to get water leak detection services, this guide will help you.
But it’s also important to be careful of the professionals you pick when opting for a leak detection system. Make sure to look at online reviews and check your experts’ ratings and portfolio. That way, you’ll get the most out of your money and time.
Do you need help with leak detection and other plumbing services? If so, contact us today and we’ll help you get started.